SJT | Scientific Journal of Technology
← Back to Volume 8, Issue 3

Experimental Study on the Solidification of Heavy Metal Pb2+ in Fly Ash-based Geopolymers

Zirui Wang, Yiting Zhang, Yahui Mao, Junchen Wu, Yifei Wang, Longhe Hu
Vol. 8, No. 3, pp. 68-78, 2026 DOI: 10.54691/e3vghm18 March 22, 2026
Download PDF
Abstract.To promote the utilization of combustion by-products such as fly ash in green building materials and mitigate heavy metal pollution in the environment, fly ash-based geopolymers were prepared to immobilize lead ions (Pb²⁺). Systematic experiments were conducted to investigate the immobilization efficiency of fly ash-based geopolymers for Pb²⁺ and the mechanical properties of the geopolymer matrix. Furthermore, the microstructure of the geopolymer matrix and the intrinsic mechanism of Pb²⁺ immobilization were elucidated via X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). The results show that the optimal immobilization content of Pb²⁺ in fly ash-based geopolymers is 2.0% when both compressive strength and leaching concentration are taken into consideration. The immobilization of Pb²⁺ by fly ash-based geopolymers is achieved through the synergistic effects of chemical bonding and physical encapsulation.
Keywords. Fly Ash; Geopolymers; Heavy Metal Immobilization; Compressive Strength; Leaching Concentration; Microstructural Characterization.
APA Citation Zirui Wang, Yiting Zhang, Yahui Mao, Junchen Wu, Yifei Wang, Longhe Hu (2026). Experimental Study on the Solidification of Heavy Metal Pb2+ in Fly Ash-based Geopolymers. Scientific Journal of Technology, 8(3), 68-78. https://doi.org/10.54691/e3vghm18

References

  1. Jin Mantong. “Study on the Immobilization of Heavy Metals in Municipal Solid Waste Incineration Fly Ash Using Geopolymer” [D]. Nanjing University of Science and Technology, 2011.
  2. Zhang Ningning, Shi Zhongyu, Han Rui, et al. “Research Progress on the 'Engineering-type' and 'Product-type' Utilization of Fly Ash” [J]. Metal Mines, 2022(5):26-36.
  3. Van Jaarsveld J G S, Van Deventer J S J. “The effect of metal contaminants on the formation and properties of waste-based geopolymers” [J]. Cement and Concrete Research. 1999, 29(8): 1189-1200.
  4. Provis J L, Rose V, Bernal S A, et al. “High-resolution nanoprobe X-ray fluorescence characterization of heterogeneous calcium and heavy metal distributions in alkali-activated fly ash” [J]. Langmuir. 2009, 25(19): 11897-11904.
  5. Zhao Lijie, Zhang Tong, Huang Wei, et al. “Preparation and Properties of Coal Gasification Coarse Slag-Slag Based Geopolymers” [J]. Bulletin of the Chinese Ceramic Society, 2022, 41(10): 3542-3547.
  6. He Zixiang, Luo Liting, Li Ruitao. “Study on the Properties of Polymer Mortar Based on Urban Municipal Solid Waste Incineration Fly Ash—Waste Glass Powder—Kaolin” [J]. Chongqing Architecture, 2025, 24(2): 58-63.
  7. Bie R, Chen P, Song X, et al. “Characteristics of municipal solid waste incineration fly ash with cement solidification treatment” [J]. Journal of the Energy Institute. 2016, 89(4): 704-712.
  8. He Chengyifeng. “Current Status and Suggestions on the Disposal Technology of Municipal Solid Waste Incineration Fly Ash under the New Situation” [J]. Environment and Development. 2019, 31(03): 66-67.
  9. Wang Qikun, Ma Siqi, Yang Hualong, et al. “Research progress on the polymerization mechanism and kinetics of aluminosilicate polymers” [J]. Journal of the Chinese Ceramic Society, 2022, 50(9): 2551-2566.
  10. Fang Haoyuan, Li Zhuowen, Jiang Shan, et al. “Study on the Proportioning of Slag-Kaolin Polymer Solidified Municipal Solid Waste Incineration Fly Ash” [J]. Green Technology, 2023(14): 184-187.
  11. Silva RV, Brito JD, Lynn CJ, et al. “Environmental impacts of the use of bottom ashes from municipal solid waste incineration: A review” [J]. Resources, Conservation and Recycling, 2019, 140: 23-35.